Novastar TB60 LED Screen Multimedia Player With 4 LAN Ports 2.3 Million Pixels
Certifications
CE, RoHS, FCC, IC, FCC ID, IC ID, UKCA, CCC, NBTC
Features
Output
⬤Loading capacity up to 1,300,000 pixels
Maximum width: 4096 pixels
Maximum height: 4096 pixels
⬤2x Gigabit Ethernet ports
These two ports serve as primary by default.
Users can also set one as primary and the other as backup.
⬤1x Stereo audio connector
The audio sample rate of the internal source is fixed at 48 kHz. The audio sample rate of the external source supports 32 kHz, 44.1 kHz, or 48 kHz. If NovaStar’s multifunction card is used for audio output, audio with a sample rate of 48 kHz is required.
⬤1x HDMI 1.4 connector
Maximum output: 1080p@60Hz, support for HDMI loop
Input
⬤1x HDMI 1.4 connector
In synchronous mode, video sources input from this connector can be scaled to fit the entire
screen automatically.
⬤2x Sensor connectors
Connect to brightness sensors or temperature and humidity sensors.
Control
⬤1x USB 3.0 (Type A) port
Allows for playback of content imported from a USB drive and firmware upgrade over USB.
⬤1x USB (Type B) port
Connects to the control computer for content publishing and screen control.
⬤1x Gigabit Ethernet port
Connects to the control computer, a LAN or public network for content publishing and screen control.
Performance
⬤Powerful processing capacity
− Quad-core ARM A55 processor @1.8 GHz
− Support for H.264/H.265 4K@60Hz video decoding
− 1 GB of onboard RAM
− 16 GB of internal storage
⬤Flawless playback
2x 4K, 6x 1080p, 10x 720p, or 20x 360p video playback Function
l All-round control plans
− Enables users to publish content and control screens from a computer, mobile phone, or tablet.
− Allows users to publish content and control screens from anywhere, anytime.
− Allows users to monitor screens from anywhere, anytime.
⬤Switching between Wi-Fi AP and Wi-Fi STA
− In Wi-Fi AP mode, the user terminal connects to the built-in Wi-Fi hotspot of the TB60. The default SSID is “AP+Last 8 digits of SN” and the default password is “12345678” .
− In Wi-Fi STA mode, the user terminal and the TB60 are connected to the Wi-Fi hotspot of a router.
⬤Synchronous and asynchronous modes
− In asynchronous mode, the internal video source works.
− In synchronous mode, the video source input from the HDMI connector works.
⬤Synchronous playback across multiple screens
− NTP time synchronization
− GPS time synchronization (The specified 4G module must be installed.)
⬤Support for 4G modules
The TB60 ships without a 4G module. Users have to purchase 4G modules separately if needed.
Network connection priority: Wired network > Wi- Fi network > 4G network
When multiple types of networks are available, the TB60 will choose a signal automatically according to the priority.
Appearance
Front Panel
| Name | Description |
| SWITCH | Switches between synchronous and asynchronous modes Staying on: Synchronous mode
Off: Asynchronous mode |
| SIM CARD | SIM card slotCapable of preventing users from inserting a SIM card in the wrong orientation |
| RESET | Factory reset buttonPress and hold this button for 5 seconds to reset the product to its factory settings. |
| USB | USB (Type B) portConnects to the control computer for content publishing and screen control. |
| LED OUT | Gigabit Ethernet outputs |
Rear Panel
| Name | Description |
| SENSOR | Sensor connectorsConnect to light sensors or temperature and humidity sensors. |
| HDMI | HDMI 1.4 connectors OUT: Output connector, support for HDMI loop
IN: Input connector, HDMI video input in synchronous mode In synchronous mode, users can enable full-screen scaling to adjust the image to fit the screen automatically. Requirements for full-screen scaling in synchronous mode: 64 pixels ≤ video source width ≤ 2048 pixels Images can only be scaled down and cannot be scaled up. |
| WiFi | Wi-Fi antenna connectorSupport for switching between Wi-Fi AP and Wi-Fi Sta |
| ETHERNET | Gigabit Ethernet portConnects to the control computer, a LAN or public network for content publishing and screen control. |
| COM 2 | GPS antenna connector |
| USB 3.0 | USB 3.0 (Type A) portAllows for playback of content imported from a USB drive and firmware upgrade over USB.
The Ext4 and FAT32 file systems are supported. The exFAT and FAT16 file systems are not supported. |
| COM 1 | 4G antenna connector |
| AUDIO OUT | Audio output connector |
| 100-240V~, 50/60Hz, 0.6A | Power input connector |
| ON/OFF | Power switch |
Indicators
| Name | Color | Status | Description |
| PWR | Red |
Staying on |
The power supply is working properly. |
| SYS | Green |
Flashing once every 2s |
The TB60 is functioning normally. |
|
Flashing once every second |
The TB60 is installing the upgrade package. | ||
|
Flashing once every 0.5s |
The TB60 is downloading data from the Internet or copying the upgrade package. | ||
| Staying on/off | The TB60 is abnormal. | ||
| CLOUD | Green | Staying on | The TB60 is connected to the Internet and theconnection is available. |
| Flashing once every 2s | The TB60 is connected to VNNOX and the connection is available. | ||
| RUN | Green | Flashing once every second | No video signal |
| Flashing once every 0.5s | The TB60 is functioning normally. | ||
| Staying on/off | FPGA loading is abnormal. |
Dimensions
Tolerance: ±0.3 Unit: mm
Specifications
| Electrical Parameters | Input power | 100-240V~, 50/60Hz, 0.6A |
| Maximum power consumption | 18 W | |
| Storage Capacity | RAM | 1 GB |
| Internal storage | 16 GB | |
| Operating Environment | Temperature | –20ºC to +60ºC |
| Humidity | 0% RH to 80% RH, non-condensing | |
| Storage Environment | Temperature | –40°C to +80°C |
| Humidity | 0% RH to 80% RH, non-condensing | |
| Physical Specifications | Dimensions | 274.3 mm × 139.0 mm × 40.0 mm |
| Net weight | 1230.4 g | |
| Gross weight | 1650.0 g
Note: It is the total weight of the product, printed materials and packing materials packed according to the packing specifications. |
|
| Packing Information | Dimensions | 385.0 mm × 280.0 mm × 75.0 mm |
| List | 1x TB60
1x Wi-Fi omnidirectional antenna 1x AC power cord 1x Quick Start Guide |
|
| IP Rating | IP20
Please prevent the product from water intrusion and do not wet or wash the product. |
|
| System Software | Android 11.0 operating system software
Android terminal application software FPGA program Note: Third-party applications are not supported. |
|
The power consumption may vary according to the setup, environment and use of the product as well as many other factors.
What about the lead time?
A: We always have stock. 1-3 days can deliver cargo.
How do you ship the goods and how long does it take to arrive?
A: By express, sea, air, train
Q15. How can I get technical support?
A: We can provide technical support via technical guidance or Teamviewer remote support.
How can i get the goods?
A: We can deliver the goods by express or by sea, pls contact us to select the most favorable delivery way.
What the software your company uses for your product?
A: We mainly use the software of Novastar, Colorlight, Linsn and Huidu.
Can I have a sample order for Led display ?
A: Yes , we welcome sample order to check and test quality. Maxed samples are acceptable.
How to work with you?
A: Email or on-line talking to inform us your requirement. If you need us to make a resolution for your led display, we are glad to be free service.
Why choose us?
A: We have best price, good quality, rich experience, excellent service, prompt reply, ODM&OEM, quick deliver and so on.
Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier co
Why do I need to use video processor ?
A: You can switch signal easier and scale the video source into certain resolution LED display. Like, PC resolution is 1920*1080, and your LED display is 3000*1500, video processor will put full PC windows into LED display. Even your LED screen is only 500*300, video processor can put full PC windows into LED display too.
Are the flat ribbon cable and power cable included if I buy modules from you ?
A: Yes, flat cable and 5V power wire are included.
How to upgrade the firmware of Linsn controllers？
A: In LEDset receiver setting page, anywhere input cfxoki, then the upgrade page will come out automatically.
How to update the firmware of Colorlight system ?
A: Need to download LEDUpgrade software
