Novastar MRV328 LED Display Receiving Card
Introduction
The MRV328 is a general receiving card that supports up to 1/32 scan. A single MRV328 supports resolutions up to 256×256@60Hz. Supporting various functions such as pixel level brightness and chroma calibration, quick adjustment of dark or bright lines, and 3D, the MRV328 can significantly improve the display effect and user experience.
The MRV328 uses 8 standard HUB75E connectors for communication, resulting in high stability. It supports up to 16 groups of parallel RGB data. Thanks to its EMC compliant hardware design, the MRV328 has improved electromagnetic compatibility and is suitable for various on-site setups.
Features
Improvements to Display Effect
⬤Pixel level brightness and chroma calibration
Work with NovaStar’s high-precision calibration system to calibrate the brightness and chroma of each pixel, effectively removing brightness differences and chroma differences, and enabling high brightness consistency and chroma consistency.
⬤Quick adjustment of dark or bright lines
The dark or bright lines caused by splicing of modules and cabinets can be adjusted to improve the visual experience. The adjustment can be easily made and takes effect immediately.
⬤3D function
Working with the sending card that supports 3D function, the receiving card supports 3D image output.
Improvements to Maintainability
⬤Mapping function
The cabinets can display the receiving card number and Ethernet port information, allowing users to easily obtain the locations and connection topology of receiving cards.
⬤Setting of a pre-stored image in receiving card
The image displayed on the screen during startup, or displayed when the Ethernet cable is disconnected or there is no video signal can be customized.
⬤Temperature and voltage monitoring
The receiving card temperature and voltage can be monitored without using peripherals.
⬤Cabinet LCD
The LCD module of the cabinet can display the temperature, voltage, single run time and total run time of the receiving card.
⬤Bit error detection
The Ethernet port communication quality of the receiving card can be monitored and the number of erroneous packets can be recorded to help troubleshoot network communication problems.
NovaLCT V5.2.0 or later is required.
⬤Firmware program readback
The receiving card firmware program can beread back and saved to the local computer.
NovaLCT V5.2.0 or later is required.
⬤Configuration parameter readback
The receiving card configuration parameters can be read back and saved to the local computer.
Improvements to Reliability
⬤Loop backup
The receiving card and sending card form a loop via the primary and backup line connections.
When a fault occurs at a location of the lines, the screen can still display the image normally.
⬤Dual program backup
Two copies of firmware program are stored in the application area of the receiving card at the factory to avoid the problem that the receiving card may get stuck abnormally during program update.
Appearance
All product pictures shown in this document are for illustration purpose only. Actual product may vary.
| Name | Description |
| HUB75E Connectors | Connect to the module. |
| Power Connector | Connect to the input power. Either of the connectors can be chosen. |
| Gigabit Ethernet Ports | Connect to the sending card, and cascade other receiving cards. Each connector can be used as input or output. |
| Self-Test Button | Set the test pattern.After the Ethernet cable is disconnected, press the button twice, and the test pattern will be displayed on the screen. Press the button again to switch the pattern. |
| 5-Pin LCD Connector | Connect to the LCD. |
Indicators
| Indicator | Color | Status | Description |
| Running indicator | Green | Flashing once every 1s | The receiving card is functioning normally. Ethernet cable connection is normal, and video source input is available. |
| Flashing once every 3s | Ethernet cable connection is abnormal. | ||
| Flashing 3 times every 0.5s | Ethernet cable connection is normal, but no video source input is available. | ||
| Flashing once every 0.2s | The receiving card failed to load the program in the application area and is now using the backup program. | ||
| Flashing 8 times every 0.5s | A redundancy switchover occurred on the Ethernet port and the loop backup has taken effect. | ||
| Power indicator | Red | Always on | The power supply is normal. |
Dimensions
Tolerance: ±0.3 Unit: mm
To make molds or trepan mounting holes, please contact NovaStar for a higher-precision structural drawing.
Pins
Specifications
| Maximum Resolution | 256×256@60Hz | |
| Electrical Specifications | Input voltage | DC 3.8 V to 5.5 V |
| Rated current | 0.5 A | |
| Rated power consumption | 2.5 W | |
| Operating Environment | Temperature | –20°C to +70°C |
| Humidity | 10% RH to 90% RH, non-condensing | |
| Storage Environment | Temperature | –25°C to +125°C |
| Humidity | 0% RH to 95% RH, non-condensing | |
| Physical Specifications | Dimensions | 145.6 mm × 95.5 mm × 18.4 mm |
| Net weight | 85.5 g | |
| Packing Information | Packing specifications | Each receiving card is packaged in a blister pack. Each packing box contains 100 receiving cards. |
| Packing box dimensions | 625.0 mm × 180.0 mm × 470.0 mm | |
The amount of current and power consumption may vary depending on various factors such as product settings, usage, and environment.
As an integrated supplier for LED display solutions, Shenzhen Yipinglian Technology Co., Ltd offers one-stop purchase and service for your projects which help your business become easier, more professional and more competitive. Yipinglian LED has been specialized in rental led display, advertising led display, transparent led display, fine pitch led display, customized led display and all kinds of LED display material.
Our products are widely used in indoor and outdoor commercial media, sports venues, stage performances, special-shape creativity, etc.
Our products have passed the professional authority, such as CE, ROHS, FCC, CCC certification and so on. We strictly carry out ISO9001 and 2008 quality management system. We could ensure production capacity of more than 2,000 square meters per month for LED displays, with 10 modernized dust-free and static-free production lines, which consist of 7 new PANASONIC high speed SMT machines, 3 large leadless reflow oven, and more than 120 skilled workers. Our professional engineers have more than 15 years' R&D experience in LED display field. We can help you to realize what you want, and more than you want.
What is the quality control of your products?
A: Quality is our first purpose. We pay great attention to the beginning and the end of production. Our products have passed CE & RoHs & ISO & FCC certification.
Do you give any discounts ?
A: Prices are directly affected by the quantity. Simple ratio's, cost more to produce small qty and samples orders then.
We have many ways to help our partners when starting the sample processes. Make sure to ask your Key Account MGR on how we can make you save some charges.
Why do I need to use video processor ?
A: You can switch signal easier and scale the video source into certain resolution LED display. Like, PC resolution is 1920*1080, and your LED display is 3000*1500, video processor will put full PC windows into LED display. Even your LED screen is only 500*300, video processor can put full PC windows into LED display too.
Products categories
-
Huidu LED Controller A7 Multimedia Player with ...
-
Huidu A6 Synchronous And Asynchronous LED Displ...
-
Novastar MRV208-1 Receiving Card For LED Screen...
-
Huidu D16 Small LED Display Controller 640*64 P...
-
Colorlight X12 Video Processor Full Color LED D...
-
Linsn X8208 Two-in-One Video Processor For Full...
