G-energy N200V5-A Slim LED Power Supply
Introduction
The power supply was designed for LED display :small size, high efficiency, stability, and reliability. Power supply has input undervoltage, output current limiting, output short circuit protection. Power supply will apply with high rectification which greatly improves the power efficiency,can reach 82.0% above, saving energy consumption, to meet with the European RoHS standard.
Product Main Specification
Output Power(W) |
Rated Input Voltage (Vac) |
Rated Output Voltage (Vdc) |
Output Current Range(A) |
Precision |
Ripple and Noise (mVp-p) |
200 |
200-240 |
+5.0 |
0-40.0 |
±2% |
≤150 |
Environment condition
NO. |
ITEM |
Specifications |
Units |
Remarks |
1 |
Permanent operating temperature |
-30-60 |
℃ |
|
2 |
Storage temperature |
-40—80 |
℃ |
|
3 |
Relative Humidity |
10—90 |
% |
|
4 |
Cooling mode |
Self-cooling |
|
|
5 |
Atmospheric pressure |
80— 106 |
Kpa |
|
6 |
Altitude |
4000 |
m |
Electrical character
1 |
Input characteristics | |||
NO. |
ITEM |
Specifications |
Units |
Remarks |
1.1 |
Rated input voltage |
220 |
Vac |
|
1.2 |
Input voltage range |
200-240 |
Vac |
|
1.3 |
Input frequency range |
47—63 |
Hz |
|
1.4 |
Efficiency |
≥81(Vin=220Vac) |
% |
Full load (room temperature) |
1.5 |
Maximum input current |
≤5.0 |
A |
|
1.6 |
Inrush current |
≤60 |
A |
2 |
Output Characteristics | |||
NO. |
ITEM |
Specifications |
Units |
Remarks |
2.1 |
Output rating voltage |
+5.0 |
Vdc |
|
2.2 |
Output current range |
0—40 |
A |
|
2.3 |
Output voltage range |
4.9-5.1 |
Vdc |
|
2.4 |
Voltage regulation accuracy |
±1% |
O |
|
2.5 |
Load regulation accuracy |
±1% |
O |
|
2.6 |
Regulation accuracy |
±2% |
O |
|
2.7 |
Ripple and noise |
≤150 |
mVp-p |
Full load;20MHz,104+47uF |
2.8 |
Power output delay |
≤3500 |
ms |
|
2.9 |
Hold up time |
≥10 |
ms |
Vin=220Vac |
2.10 |
Output voltage rise time |
≤50 |
ms |
|
2.11 |
Off overshoot |
±5% |
O |
|
2.12 |
Output dynamic |
Voltage changes less than ± 5% VO; dynamic response time ≤ 250us |
|
LOAD 25%-50%,50%-75% |
3 |
Protection Features | |||
NO. |
ITEM |
Specifications |
Units |
Remarks |
3.1 |
Input undervoltage protection |
135-170 |
VAC |
FULL LOAD |
3.2 |
Input voltage recovery point |
150-175 |
VAC |
|
3.3 |
Output current limit protection point |
44-62 |
A |
Hiccup Model, Auto-recovery |
3.4 |
Output short circuit protection |
≥44 |
A |
|
Remarks: latch can recovery after re-starting. |
4 |
Other features | |||
NO. |
ITEM |
Specifications |
Units |
Remarks |
4.1 |
MTBF |
≥40,000 |
H |
|
4.2 |
Leakage current |
<3.0mA(Vin=220Vac) |
|
GB8898-2001 9.1.1 |
Safety Features
NO. |
ITEM |
Test conditions |
Standard/SPEC. |
|
1 |
Isolation voltage |
Input-O utput |
3000Vac/10mA/1min |
No flashover, no breakdown |
Input-P E |
1500Vac/10mA/1min |
No flashover, no breakdown |
||
Output- PE |
500Vac/10mA/1min |
No flashover, no breakdown |
Relative Data Curve
Input voltage & load cure
Temperture & load cure
Effi & load cure
The definition of mechanical properties and connectors (Units:mm )
- Installation hole size
2.Dimensions L190 x W83.5 x H30.7
Caution
1.The safe use, to avoid hand contact with heat sink, resulting in electric shock.
2. PCB board mounting hole stud diameter of not more than 8mm.