G-energy JPS200V5-A Power Supply AC to DC Converter 110V/220V Input for Advertising LED Display Screen

Short Description:

The power supply has the characteristics of small volume, high efficiency, stable operation and high reliability. The power supply has input under-voltage, output current limiting, output short circuit and so on. The rectifier circuit greatly improves the efficiency of the power supply and saves energy consumption.

INQUIRY NOW Whatsapp Email

Product Detail

Product Tags

Product Main Specification

Output Power

(W)

Rated Input

Voltage

(Vac)

Rated Output

Voltage (Vdc)

Output Current

Range

(A)

Precision

Ripple and

Noise

(mVp-p)

200

110/200

+5.0

0-40.0

±2%

≤200

Environment Condition

Item	Description	Tech Spec	Unit	Remark
1	Working temperature	-30—60	℃	Please refer to "temperature decrement curve"
2	Storing temperature	-40—85	℃	Please refer to "temperature decrement curve"
3	Relative humidity	10—90	%	No condensation
4	Heat dissipation method	Air cooling
5	Air pressure	80— 106	Kpa
6	Height of sea level	2000	m

Electrical Character

1	Input character
Item	Description	Tech Spec	Unit	Remark
1.1	Rated voltage	110/220	Vac
1.2	Input frequency range	47—63	Hz
1.3	Efficiency	≥87.0（220VAC）	%	Output Full Load (at room temperature)
1.4	Efficiency factor	≥0.5		Rated input voltage, output full load
1.5	Max input current	≤3.5	A
1.6	Dash current	≤120	A	Cold state test @220Vac
2	Output character
Item	Description	Tech Spec	Unit	Remark
2.1	Output voltage rating	+5.0	Vdc
2.2	Output current range	0-40.0	A
2.3	Output voltage adjustable range	Unadjustable	Vdc
2.4	Output voltage range	±2	%
2.5	Load regulation	±2	%
2.6	Voltage stability accuracy	±2	%
2.7	Output ripple and noise	≤200	mVp-p	Rated input, output full load, 20MHz bandwidth, load side and 47uf / 104 capacitor
2.8	Start output delay	≤3.5	S	Vin=220Vac @25℃ test
2.9	Output voltage raise time	≤100	ms	Vin=220Vac @25℃ test
2.10	Switch machine overshoot	±5	%	Test conditions: full load, CR mode
2.11	Output dynamic	The voltage change is less than±10% VO; the dynamic response time is less than 250us	mV	LOAD 25%-50%-25% 50%-75%-50%
3	Protection character
Item	Description	Tech Spec	Unit	Remark
3.1	Input under-voltage protection	（75-85）/110 （155-185）/220	VAC	Test conditions: full load
3.2	Input under-voltage recovery point	（75-85）/110 （155-185）/220	VAC	Test conditions: full load
3.3	Output current limiting protection point	48-65	A
3.4	Output short circuit protection	Self-Recovery	A	HI-CUP hiccups self-recovery, avoid long-term damage to power after a short-circuit power.
3.5	Over voltage protection	/	V
4	Other character
Item	Description	Tech Spec	unit		Remark
4.1	MTBF	≥40,000	H
4.2	Leakage Current	＜10(Vin=230Vac)	mA		GB8898-2001 test method

Production Compliance Characteristics

Item	Description		Tech Spec	Remark
1	Electric Strength	Input to output	3000Vac/10mA/1min	No arcing, no breakdown
2	Electric Strength	Input to ground	1500Vac/10mA/1min	No arcing, no breakdown
3	Electric Strength	Output to ground	500Vac/10mA/1min	No arcing, no breakdown