G-energy JPS200P Switching Power Supply 200W Output for Indoor Outdoor Rental LED Display Screen

Short Description:

The power supply has the characteristics of small volume, high efficiency, stable operation and high reliability. The power supply has input under-voltage, output current limiting, output short circuit and so on. The synchronous rectifier circuit greatly improves the efficiency of the power supply and saves energy consumption. The power supply is wide voltage input, wide ambient temperature, with power factor correction circuit, and has a wide range of applications.

INQUIRY NOW Whatsapp Email

Product Detail

Product Tags

Product Main Specification

Output Power

(W)

Rated Input

Voltage

(Vac)

Rated Output

Voltage (Vdc)

Output Current

Range

(A)

Precision

Ripple and

Noise

(mVp-p)

200

90-264

+5.0

0-40.0

±2%

+5.0

≤200mVp-p

@25℃

Environment Condition

Item	Description	Tech Spec	Unit	Remark
1	Working temperature	-30—60	℃	Refer to the use of environmental temperature and load curve.
2	Storing temperature	-40—85	℃
3	Relative humidity	10—90	%	No condensation
4	Heat dissipation method	Natural cooling
5	Air pressure	80— 106	Kpa
6	Height of sea level	2000	m

Electrical Character

1	Input character
Item	Description	Tech Spec	Unit	Remark
1.1	Rated voltage	100-240	Vac	Refer to the use of environmental temperature and load curve.
1.2	Input frequency range	50—60	Hz
1.3	Efficiency	≥88.0（220VAC,25℃）	%	Output Full Load (at room temperature)
1.4	Efficiency factor	≥0.95		Rated input voltage, output full load
1.5	Max input current	≤3	A
1.6	Dash current	≤100	A	Cold state test @220Vac
2	Output character
Item	Description	Tech Spec	Unit	Remark
2.1	Output voltage rating	+5.0	Vdc
2.2	Output current range	0-40.0	A
2.3	Output voltage adjustable range	/	Vdc
2.4	Output voltage range	±2	%
2.5	Load regulation	±2	%
2.6	Voltage stability accuracy	±2	%
2.7	Output ripple and noise	≤200（@25℃）	mVp-p	Rated input, output full load, 20MHz bandwidth, load side and 47uf / 104 capacitor
2.8	Start output delay	≤3.0	S	Vin=220Vac @25℃ test
2.9	Output voltage raise time	≤100	ms	Vin=220Vac @25℃ test
2.10	Switch machine overshoot	±5	%	Test conditions: full load, CR mode
2.11	Output dynamic	The voltage change is less than±5% VO; the dynamic response time is less than 250us	mV	LOAD 25%-50%-25% 50%-75%-50%
3	Protection character
Item	Description	Tech Spec	Unit	Remark
3.1	Input under-voltage protection	60-80	VAC	Test conditions: full load
3.2	Input under-voltage recovery point	75-88	VAC	Test conditions: full load
3.3	Output current limiting protection point	+5.0V，＞48	A	Self-recovery
3.4	Output short circuit protection	+5.0V，Self-Recovery	A	Self-recovery
4	Other character
Item	Description	Tech Spec	unit		Remark
4.1	MTBF	≥50,000	H
4.2	Leakage Current	＜1(Vin=230Vac)	mA		GB8898-2001 test method

Production Compliance Characteristics

Item	Description		Tech Spec	Remark
1	Electric Strength	Input to output	3000Vac/10mA/1min	No arcing, no breakdown
2	Electric Strength	Input to ground	1500Vac/10mA/1min	No arcing, no breakdown
3	Electric Strength	Output to ground	500Vac/10mA/1min	No arcing, no breakdown

Relative Data Curve

Relationship between environmental temperature and load

Input voltage and load voltage curve

Load and efficiency curve

The mechanical character and the definition of connectors（ unit：mm）

Dimensions: length× width× height=208×59×30±0.5.
Assembly Holes Dimensions

Attention For Application

1、Power supply to be safe insulation, any side of the metal shell with the outside should be more than 8mm safe distance. If less than 8mm need to pad 1mm thickness above PVC sheet to strengthen the insulation.

2、Safe use, to avoid contact with the heat sink, resulting in electric shock.

3、PCB board mounting hole stud diameter not exceeding 8mm.

4、Need a L315mm*W200mm*H3mm aluminum plate as auxiliary heat sink.